Walk-in type cold room, mono block, 30m3 Manufacturer,Supplier and Exporter in India
Product Code : EL-CBC-10739
General description
Walk-in type cold room, mono block, 30m3 for storage of vaccines at national and sub-national levels.
Technical specifications :-
Prefabricated Cold room, walk-in type, mono block, supplied with all necessary mechanical and electrical fittings and equipment for quick and easy installation in the field.
External dimensions : L=3890 x W=3890 x H=2300 mm
Internal dimensions : L=3690 x W=3690 x H=2100 mm
The unit is designed to operate from a mains supply of 220/240 V/3/50Hz with a dual refrigeration unit, each refrigeration unit is sized to give 100% stand-by capacity designed to operate at +2°C - +8°C in a maximum ambient of 43°C.
Units operating from a mains supply of 220V/3 phase/60Hz is also available as an option.
The electrical control is fitted with phase failure and voltage spike protection.
The complete unit is also designed for installation in a housed area such as a warehouse in order to meet temperature design standards.
Specification details :-
Prefabricated modular walk-in cold room complete with floor, wall and ceiling panels.
Refrigeration unit (Ceiling-mounted) :-
uses CFC-free refrigerant gas R452a.
has an automatic duty sharing. The control panel will alternate the operation of each refrigeration system on a 7-day changeover basis, automatically switching over in the event of the failure of one system.
is fitted with a run-hour meter.
has an automatic defrost.
with sealants for air tightening the cut outs between monobloc units, pipes and wall panel.
Panel Insulation :-
CFC-free panels with polyurethane insulation.
Insulation thickness : 100 mm with U-value of 0.23 W/m2K.
Wall and roof panel construction :-
Interior and exterior wall finish : White food safe laminate.
PVC coves & angle on joints between panels to minimize cold-bridging.
Temperature control :-
Refrigeration systems include an electronic controller with an accuracy of +/- 1°C.
Internal temperature : +2°C to +8°C.
Floor construction :-
1.5mm rigidized galvanized steel interior and smooth galvanized steel exterior modular floor.
Door construction :-
Average thermal transmittance (U value) of the door panels: 0.23 W/m2K.
Foam insulation complies with the Temperature zone for the site of the cold room and contains fire-retardant.
Thickness : 100 mm
Opening width : 800 mm.
Opening height : 1975 mm.
With heavy duty hinges and lock with internal safety release.
An internal plastic strip curtain.
Alarm System :-
A mains-operated audible and visible alarm in the event of mains failure or when room temperatures are outside set limits.
With battery backup.
Alarm output can be connected to building management systems, a GSM telemetry unit to send text alerts to mobile phones or to an autodialler to send pre-recorded messages to mobile phones or landlines.
Shelving :-
5 tier stainless steel floor mounted shelving bays to three walls of each cold room.
Shelving will be supplied with adjustable perforated shelves and vertical support poles. The top face of the lowest shelf is at 200mm above the floor.
Shelving will be 600mm deep x 1650mm high and is supplied in individual bays to suit the configuration of the cold room.
Each shelf can support a weight of 300kg giving a distributed weight of 833 kg/m3 per shelf for a 1,200mm shelving bay.
Lighting :-
Room is equipped with low-energy LED lights.
The minimum level of illumination on the vertical side of the lowest shelves : 300 lux.
