Sterilizer, steam, large, electric, with access Manufacturer,Supplier and Exporter in India
Product Code : EL-RA-10989
General Description
Large steam sterilizer (aurtoclave), approximate capacity between 80 and 85 litre, electric, with a front-loading door.
Technical Specifications :-
The sterilizer is suitable for wrapped, unwrapped, solid and hollow items as well as porous loads such as drapes and gowns.
The unit fitted with a front-loading door.
The internal chamber made from staineless steel 316L.
The internal chamber has a volume between 80 and 85 Litre.
Vacuum relief line should be filtered with ≤0.3 µm pore size to allow sterile air into chamber.
The unit is provided with a minimum of three (3) internal shelves or accommodates a minimum of 3 trays.
The unit has a standard program at 2.2 bar at a temperature of 134°C.
Depending on the model the unit has a standard program between either:
1.0 and 1.1 bar with a temperature between 118 – 121°C, or 0.1 and 0.3 with a temperature between 105 - 138°C.
The unit is fitted with a safety lock on the front door, preventing the door to be opened when the unit is under pressure.
The unit is provided with an automatic cycle shut-off.
The unit provided with an internal water tank of at least 14 litres.
The unit equipped with a steam generator.
The unit is fitted with a water circuit filter.
The unit is designed in such a way that outer surfaces remain at safe temperatures when the unit is in operation.
The unit is designed and constructed in such a way that it is able to withstand frequent disinfection with hospital-grade products.
Units are available for different types of power girds; to be specified at the time of ordering. Certain power girds might require additional parts which come at additional costs:
·3 phases at 400 Volt.
·3 phases at 220 Volt.
·1 phase at 220 Volt.
Intended Use
Steam sterilizers use pressurized steam to generate moist heat to eliminate viable microbes from non-heat-sensitive medical devices, including heat-tolerant products used for surgical and general patient care.
Typical items to be sterilized include surgical instrument packs, surgical implants, irrigation fluids, devices intended for and used by patients in isolation, and obstetric and dental instruments.
Steam sterilization kills microbes effectively and is often viewed as the gold standard of healthcare sterilization methods.
Large steam sterilizers are used for bulk sterilization processing and are typically found in the hospital's central supply department.
Most operating suites and labour and delivery areas are equipped with smaller units for their own routine needs; however, areas that perform a great deal of sterilization may require large sterilizers.
Alarm and Safety Features :-
Alarms are audible as well as visual.
Alarms are available for low water.
Alarms are available for door not closed.
Alarms are available for exceeding high temperature limit.
Alarms prior to temperature reaching limits of the equipment.
Alarms prior to pressure reaching limits of the equipment.
Alarms to indicate failed cycles, e.g. early termination, failure to reach targeted temperature or pressure.
A notification that the end of sterilization cycle has been reached.
The unit is provided with an over-pressure safety system through a safety valve.
The unit is provided with an over-temperature safety system installed which will abort the cycle and generate an alarm.
Display Features :-
The unit is fitted with a front panel providing information on the unit.
The display shows the ongoing cycle.
The display indicates the time until the programme is finished.
The display indicates the current internal temperature.
The display indicates the current internal pressure.
The display will show any alerts or alarms.
