Water tank, collapsible for trucking, Manufacturer,Supplier and Exporter in India
Product Code : EL-WS-11218
General Description
Water tank (bladder), 6000 litres (6 cbm), collapsible for water trucking, made of food grade material
Technical Specifications :-
Collapsible (flexible) water tank (bladder) manufactured from UV resistant, food grade PVC coated polyester fabric (minimum 1100 g/m2), fitted with inlet and cap on top of the tank. All materials used should be suitable for use with chlorinated drinking water.
This bladder tank should be specifically designed for use on trucks for water transport.
Dimensions of the tank : 4m long, 2.2 m wide and 0.65 m high (maximum 6 tons capacity).
Material for the tank :-
Mildew and rot resistant Opaque, to inhibit algae growth
Weight : 1100 g/m². Temperature resistance: -30ºC / +70ºC.
Assembly : Heat welding/high frequency welding.
Base fabric (substrate) : Bi-composite polyester or equivalent material.
Outer coating : Abrasion and UV-resistant fabric such as PVC, weight minimum 480 g/m².
Inner coating : Black polyurethane, PVC or equivalent coating able to withstand, without alteration of the stored drinking water, chlorine concentration of 0.5 mg/litre at a water temperature of 35ºC, and peak chlorine concentration of 5 mg/litre during cleaning process. Weight minimum 200 g/m².
The tank is supplied with :-
5 x Heavy duty 50mm polyester webbing with becketed eye loops and 2 x 50 mm heavy duty webbing straps (two each end) with becketed eye loops for securing basis - 14 per unit.
Including adjustable holding down straps
2 x Overpressure relief valves (2 psi) automatic c/w rubber attached plug.
1 x 4" (internal measurement) screwed filler cap with captive cord
2 x 3" BSP male stub fitting (both at the same end) manufactured from LM25 aluminum with anti chafe patch and naps.
Each external stub shall be fitted with type 55-3" BSP female gate valve PN16 Giacomini type.
2 x 3" (M) to 2" (M) reducers BSP, plastic
1 x Ground sheet
1 x Repair kit
1 x Set of instructions
1 x Holdall
2 x 2" BSP equal 'T' (F), plastic
4 x 2" (M) to 1" (F) reducers, plastic
4 x 1" (M) hose tail connector, plastic
4 x 3 m lengths of 1" flexible hose pipe, to fit over hose tail connectors
2 x Anti chafe patches and covers
